жнів . 27, 2024 18:36 Back to list

How to Remove Rear Brake Drum

Removing Rear Brake Drum A Step-by-Step Guide


Removing the rear brake drum can be an essential maintenance task for vehicle owners who are looking to inspect, clean, or replace the brake shoes and other components. Whether you’re experiencing unusual noises, reduced braking performance, or simply conducting a routine check, this guide will walk you through the process of safely and effectively removing the rear brake drum.


Tools and Materials Required


Before you begin, gather the necessary tools and materials


- Jack and jack stands - Lug wrench - Brake drum puller (if needed) - Screwdriver (flathead) - Clean rags - Brake cleaner - Safety goggles and gloves


Step 1 Prepare the Vehicle


Start by parking your vehicle on a level surface and engaging the parking brake. To ensure safety, wear gloves and safety goggles to protect yourself from dust and debris. Use a lug wrench to loosen the lug nuts on the rear wheel of the side you’ll be working on, but do not fully remove them yet.


Step 2 Raise the Vehicle


Using a jack, lift the rear of the vehicle and secure it with jack stands. This not only provides access to the rear wheel but ensures your safety while working underneath the car. Once the vehicle is secure, remove the lug nuts completely and take off the wheel.


Step 3 Inspect the Brake Drum


removing rear brake drum

How to Remove Rear Brake Drum

Once you've removed the wheel, you'll see the brake drum at the back. Before attempting to take the drum off, visually inspect it for any cracks or abnormalities. If the drum appears damaged, you might consider replacing it rather than simply removing it for maintenance.


Step 4 Remove the Brake Drum


In most cases, the brake drum should slide off easily. However, if it's stuck due to rust or debris, you can use a brake drum puller to apply even pressure and help it come loose. Alternatively, gently tap around the drum with a rubber mallet to loosen it.


If there are retaining screws, use a flathead screwdriver to unscrew them before attempting to pull the drum off. Be cautious not to damage any components.


Step 5 Clean and Inspect


With the drum removed, take the opportunity to inspect the brake shoes, springs, and other internal components for wear and tear. Use brake cleaner and rags to clean any dust or debris from inside the drum and on the brake components.


Step 6 Reassemble the Brake System


After your inspection and cleaning, you can reinstall the brake drum. Make sure it fits snugly over the brake shoes. Replace any retaining screws as necessary. Once the drum is in place, mount the wheel back on, tighten the lug nuts slightly, and lower the vehicle back to the ground.


Conclusion


Removing the rear brake drum might seem daunting at first, but with the right tools and careful attention, it can be a straightforward process. Regular maintenance of your vehicle’s brakes is crucial for safe driving. If you encounter any issues during this process or are unsure about any step, it’s always best to consult with a professional mechanic. Remember, safety first!




Share

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


belBelarusian