Sep . 02, 2024 17:26 Back to list

How to Remove Rear Brake Drum

How to Get Rear Brake Drum Off A Step-by-Step Guide


Removing a rear brake drum can seem daunting, but with the right tools and a systematic approach, it can be accomplished safely and effectively. Here’s a step-by-step guide to help you through the process.


Tools You Will Need


1. Jack and jack stands 2. Lug wrench 3. Brake drum removal tool (optional but helpful) 4. Screwdriver (flat-head) 5. Pliers 6. Brake cleaner 7. Safety glasses and gloves


Step 1 Safety First


Before you start, ensure you wear safety glasses and gloves. Park your vehicle on a flat surface, engage the parking brake, and make sure the ignition is off.


Step 2 Lift the Vehicle


Loosen the lug nuts on the rear wheel slightly while the car is still on the ground. Next, use the jack to lift the car and secure it with jack stands. Make sure it's stable before you proceed.


Step 3 Remove the Wheel


Take off the lug nuts completely and remove the wheel

. This will give you clear access to the brake drum.

Step 4 Inspect the Brake Drum


how to get rear brake drum off

How to Remove Rear Brake Drum

Check the brake drum for retaining screws or clips. Some drums are held in place by screws that need to be removed before you can take the drum off. If your drum has these, use a screwdriver to remove them.


Step 5 Attempt to Remove the Drum


Once any retaining screws are removed, try to pull the drum straight off. If it doesn’t budge, it may be rusted or the brake shoes might be stuck to the drum.


Step 6 Use a Brake Drum Puller


If the drum is stubborn, you can use a brake drum puller. This tool helps to evenly apply pressure and pulls the drum off without damaging it. Follow the instructions for the tool carefully.


Step 7 Free Stuck Drums


If you still cannot remove the drum, tap around the circumference gently with a hammer. Avoid hitting the drum too hard, as it can cause damage. You can also apply some brake cleaner to the area where the shoes contact the drum. This helps break down any rust or debris that may be causing the drum to stick.


Step 8 Clean and Inspect


Once removed, clean the interior of the drum with brake cleaner. This is a good time to inspect the brake shoes and components for wear or damage.


Conclusion


Removing a rear brake drum doesn’t have to be a challenging task. By following these steps and taking your time, you can successfully get the job done. Always remember to consult your vehicle’s manual for specific instructions related to your model, and don’t hesitate to seek professional help if needed. Safe maintenance leads to better vehicle performance!




Share

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


de_DEGerman

Warning: Undefined array key "ga-feild" in /home/www/wwwroot/HTML/www.exportstart.com/wp-content/plugins/accelerated-mobile-pages/templates/features.php on line 6714