Jun . 23, 2024 05:16 Back to list

Removing Brake Drum A Step-by-Step Guide

How to Remove a Brake Drum A Step-by-Step Guide When it comes to automotive maintenance, understanding the process of removing a brake drum is essential for ensuring your vehicle's safety and optimal performance. Whether you're doing routine repairs or upgrading your brakes, here's a detailed guide on how to take off a brake drum. 1. **Prepare Your Workspace** Start by parking your car on a level surface and engaging the emergency brake. Ensure the engine is turned off and the keys are removed. Use wheel chocks to prevent any accidental rolling. 2. **Loosen Lug Nuts** Using a lug wrench, loosen the lug nuts on the wheel you plan to work on but don't remove them yet. It's easier to do this with the weight of the car still on them. 3. **Jack Up the Car** Position a floor jack under the designated jacking point of your car and raise it until the wheel is off the ground. Place jack stands securely beneath the car for safety. 4. **Remove Lug Nuts and Wheel** Now, fully remove the lug nuts and gently slide the wheel off the hub. 5. **Remove Brake Shoe Retaining Spring** Locate the brake shoe retaining spring, also known as the 'star wheel adjuster'. Use a pry bar or special adjuster tool to compress the adjuster and release the spring. 6. **Unscrew Adjuster** Turn the star wheel counterclockwise to extend the adjuster, which will create space between the brake shoes and the drum **Unscrew Adjuster** Turn the star wheel counterclockwise to extend the adjuster, which will create space between the brake shoes and the drumRemoving Brake Drum A Step-by-Step Guide **Unscrew Adjuster** Turn the star wheel counterclockwise to extend the adjuster, which will create space between the brake shoes and the drum **Unscrew Adjuster** Turn the star wheel counterclockwise to extend the adjuster, which will create space between the brake shoes and the drumRemoving Brake Drum A Step-by-Step Guidehow to take off brake drum. 7. **** With the shoes slightly separated from the drum, you should be able to see the wheel cylinder. Pry the drum off the hub using a drum puller or a large flathead screwdriver. If it's stuck, tap gently with a rubber mallet. 8. **Remove Studs and Hardware** Once the drum is loose, remove any hardware securing the brake components, such as the wheel cylinder, springs, and hardware. Be careful not to lose any small parts. 9. **Inspect and Clean** Before reassembly, inspect the drum and brake components for wear or damage. Clean all parts thoroughly with brake cleaner and a wire brush. 10. **Reassembly** Reverse the steps to reinstall the brake drum, starting with applying a light coat of high-temperature brake grease on the new wheel cylinder and where the drum contacts the hub. Make sure everything is properly aligned and tightened. Remember, safety always comes first in automotive work. If you're unsure about any step, consult a professional mechanic or refer to your car's specific repair manual. Regular maintenance and knowing how to perform tasks like removing a brake drum can save you time and money in the long run.


Share

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


hawHawaiian