Step-by-step Guide for Removing Rear Brake Drum on Mitsubishi Canter Vehicle

Հլս . 28, 2024 12:00 Back to list

Step-by-step Guide for Removing Rear Brake Drum on Mitsubishi Canter Vehicle

How to Remove the Rear Brake Drum on a Mitsubishi Canter

Removing the rear brake drum on a Mitsubishi Canter is a task that can be accomplished with some basic tools and mechanical knowledge. Regular brake maintenance is essential for the safe operation of your vehicle and ensures that the braking system functions effectively. This article will guide you through the steps necessary to remove the rear brake drum for inspection or replacement.

Tools and Materials Needed

1. Basic Hand Tools A socket set, wrenches, and screwdrivers are essential. 2. Jack and Jack Stands To lift the vehicle safely. 3. Brake Cleaner To clean components during the process. 4. Lubricant For reassembling parts. 5. Safety Gear Gloves and safety glasses should always be worn.

Steps for Removal

1. Preparation Before starting, ensure the vehicle is parked on a flat surface. Engage the parking brake to prevent any movement during the process. Gather all the tools and materials needed.

2. Lifting the Vehicle Use a jack to lift the rear of the Canter. Once elevated, securely place jack stands under the frame to ensure safety while you work. Never rely solely on the jack for support.

3. Removing the Wheel Start by loosening the wheel lug nuts with a wrench before lifting the vehicle. Once the vehicle is securely lifted and supported, remove the lug nuts completely and take off the rear wheel to expose the brake assembly.

mitsubishi canter rear brake drum removal

4. Inspecting the Brake Assembly With the wheel removed, inspect the brake components for any visible damage or wear. This inspection will help in determining whether only the brake drum needs replacing or if other components like brake shoes are also worn out.

5. Removing the Brake Drum The brake drum is typically held in place by the friction between the drum and the brake shoes. In some cases, there may also be retaining screws. If there are screws, remove them. If the drum does not come off easily, use a brake drum puller tool to gently pry it off without damaging the surrounding components. Apply some brake cleaner to the outer surface of the drum to loosen any rust or debris which might be preventing removal.

6. Inspecting the Brake Drum Once removed, inspect the interior of the drum for scoring, cracks, or excessive wear. If the drum is damaged beyond repair, it should be replaced. Also, check the brake shoes for wear; they may need replacing if they are worn thin.

7. Reassembly After inspection, if no further work is necessary, reassemble the brake drum. Apply a thin layer of brake lubricant to the wheel bearings to ensure smooth operation. Place the drum back onto the hub and, if applicable, secure any retaining screws back in place.

8. Reinstalling the Wheel Position the wheel back onto the hub and hand-tighten the lug nuts. Once secured, lower the vehicle from the jack stands and use a torque wrench to ensure that the lug nuts are tightened to the manufacturer's specifications.

9. Final Checks After the wheel is securely back in place, pump the brake pedal a few times to set the brake shoes against the drum. This ensures that everything is functioning correctly before taking the vehicle back on the road.

Conclusion

Regular brake maintenance, including the inspection and removal of the rear brake drum of a Mitsubishi Canter, is crucial for safe driving. By following these steps, you can efficiently manage brake system maintenance and ensure optimal vehicle performance. Always consult your vehicle’s manual for specific details and safety precautions related to your particular model. If you feel uncertain at any stage of the process, it's always a good idea to seek professional assistance.