Guide to Removing Rear Brake Drum on Mitsubishi Canter Vehicle

nóv . 25, 2024 00:52 Back to list

Guide to Removing Rear Brake Drum on Mitsubishi Canter Vehicle

Removing the Rear Brake Drum from a Mitsubishi Canter

When it comes to maintaining your Mitsubishi Canter, ensuring that the braking system is functioning properly is crucial for safety. One of the essential tasks in brake maintenance is the removal of the rear brake drum. This process may seem daunting, but with the right tools and procedures, it can be completed efficiently. Here’s a step-by-step guide to help you through the removal of the rear brake drum on your Mitsubishi Canter.

Tools and Materials Needed

Before you begin, gather the necessary tools to make the process smoother. You will need

- Jack and jack stands - Lug wrench - Brake drum puller (if necessary) - Screwdrivers (flathead and Phillips) - Wrench set - Torque wrench - Pliers

Step 1 Safety First

Ensure your vehicle is parked on a level surface. Engage the parking brake and wear safety glasses to protect your eyes from dust and debris.

Step 2 Lifting the Vehicle

Using a lug wrench, loosen the lug nuts on the rear wheels while the wheels are still on the ground. Once loosened, use a jack to lift the rear of the vehicle and secure it with jack stands. After securing the vehicle, remove the lug nuts completely and take off the rear wheels.

mitsubishi canter rear brake drum removal

Step 3 Removing the Brake Drum

1. Inspect for Retaining Clips Some models may have retaining clips or screws holding the brake drum in place. Use a screwdriver to remove these clips if present. 2. Check for Rust and Debris It’s common for brake drums to accumulate rust or debris. Gently tap around the drum using a mallet to loosen it. If it’s stuck, you can use a brake drum puller to apply even force and safely remove it.

3. Take Off the Drum Once you’ve ensured all clips or screws are removed, and the drum is free of obstructions, carefully slide it off the wheel hub. It may require a bit of wiggling to free if it has been on for a long time.

Step 4 Inspecting the Components

After removing the brake drum, take the time to inspect the brake shoes, springs, and other components for wear and tear. This is a great opportunity to clean any dust or debris accumulated over time.

Step 5 Reassembly

If you’re replacing or servicing the brake shoes, follow the service manual instructions for installation. Once everything is in place, slide the drum back onto the hub, securing it with any retaining clips or screws you previously removed. Reattach the wheels, tighten the lug nuts in a star pattern, and lower the vehicle back to the ground.

Conclusion

Removing the rear brake drum on your Mitsubishi Canter is a vital maintenance task that helps ensure safe braking performance. With the right tools and adherence to safety protocols, this process becomes manageable. Regular inspection and maintenance of your braking system will not only extend the life of your components but also enhance your vehicle’s safety on the road.