Guide to Removing the Rear Brake Drum on a Mitsubishi Canter Vehicle

Oct . 19, 2024 05:12 Back to list

Guide to Removing the Rear Brake Drum on a Mitsubishi Canter Vehicle

Removing the Rear Brake Drum of a Mitsubishi Canter A Step-by-Step Guide

The Mitsubishi Canter is a robust and reliable light commercial vehicle, widely used for transporting goods. Maintaining the braking system is crucial for ensuring safety and optimal performance. One of the essential maintenance tasks is the removal of the rear brake drum, especially when you need to replace worn brake shoes or conduct a thorough inspection of the braking components. In this guide, we will walk you through the process of removing the rear brake drum of a Mitsubishi Canter.

Tools and Materials Required

Before you start, ensure you have the following tools and materials ready

1. Jack and jack stands 2. Lug wrench 3. Brake drum puller (if necessary) 4. Screwdrivers (flathead and Phillips) 5. Wrench set 6. Torque wrench 7. Cleaning rag 8. Brake cleaner 9. New brake shoes (if required) 10. Pneumatic air tool (optional)

Step-by-Step Removal Process

Step 1 Safety First

Before attempting any maintenance, ensure the vehicle is parked on a flat surface. Engage the parking brake and chock the front wheels to prevent the vehicle from rolling.

Step 2 Loosen the Wheel Nuts

Using a lug wrench, slightly loosen the wheel nuts on the rear tires. Do not remove them completely yet; simply break their initial resistance while the vehicle is still on the ground.

Step 3 Lift the Vehicle

Using your jack, lift the rear end of the Mitsubishi Canter. Make sure to position the jack under a suitable lifting point as specified in the vehicle manual. Once the vehicle is appropriately elevated, securely place jack stands under it to ensure stability.

Step 4 Remove the Rear Wheels

Now that the vehicle is safely lifted, remove the previously loosened wheel nuts and take off the rear wheels. This will provide you with access to the brake drums.

mitsubishi canter rear brake drum removal

Step 5 Inspect the Brake Drum

Before removing the brake drum, inspect it for any signs of wear or damage. Look for scoring, cracks, or excessive rust. If the brake drum appears to be in poor condition, it may require replacement.

Step 6 Remove the Brake Drum

With the wheel removed, you can now access the brake drum. In many cases, the drum will slide off easily. If you encounter resistance, it may be stuck due to rust or debris. In such cases, use a brake drum puller to gently pull the drum off the hub.

Step 7 Inspect the Brake Components

Once the drum is removed, inspect the brake shoes, springs, and wheel cylinder for wear or damage. If you detect any issues, this is the perfect time to replace the shoes and any other affected components.

Step 8 Clean the Area

Using a brake cleaner and a rag, clean the brake assembly and the inside of the drum. This will remove dust and debris that could affect the performance of your brakes.

Step 9 Reassemble

After performing any necessary repairs or replacements, place the brake drum back onto the hub. Ensure it is seated correctly. Reassemble the brake components, including the springs and any clips that were removed.

Step 10 Reinstall the Wheel

Place the wheel back onto the hub and hand-tighten the lug nuts. Lower the vehicle from the jack stands and then fully tighten the nuts in a crisscross pattern using a torque wrench to ensure even distribution of pressure.

Conclusion

Removing the rear brake drum of a Mitsubishi Canter doesn't have to be a daunting task. By following these steps carefully and taking your time, you can successfully complete the maintenance on your vehicle's braking system. Regular brake inspections and maintenance not only enhance safety but also prolong the life of your vehicle. Always refer to your Mitsubishi Canter’s service manual for specific instructions and torque specifications for your particular model.