mitsubishi canter rear brake drum removal

Nov . 02, 2024 10:17 Back to list

mitsubishi canter rear brake drum removal

How to Remove the Rear Brake Drum on a Mitsubishi Canter

Removing the rear brake drum on a Mitsubishi Canter can seem daunting, but with the right tools and a step-by-step approach, it can be accomplished safely and effectively. This guide provides an overview of the process and covers important safety considerations.

Tools and Equipment Needed

Before you begin, gather the following tools and equipment

- Jack and jack stands - Wheel chocks - Lug wrench - Brake drum puller (if needed) - Screwdriver - Clean rags - Brake cleaner - Safety glasses - Gloves

Safety Precautions

Safety should always be your priority when working on a vehicle. Ensure that you have a clean, well-lit workspace. Before starting, park the Mitsubishi Canter on a flat surface and engage the parking brake. Use wheel chocks to secure the front wheels and prevent any movement while you are working on the rear brakes.

Step-by-Step Guide to Removing the Rear Brake Drum

1. Prepare the Vehicle First, park the vehicle on a flat surface and secure it with wheel chocks. Engage the parking brake and ensure the ignition is off.

2. Loosen the Wheel Lug Nuts Using a lug wrench, slightly loosen the lug nuts on the rear wheel where you will be removing the brake drum. Do not remove them completely at this stage.

mitsubishi canter rear brake drum removal

3. Raise the Vehicle Place a jack under the appropriate jacking point near the rear wheel. Once raised, secure the vehicle with jack stands for safety. Ensure that the jack stands are stable and correctly positioned.

4. Remove the Wheel Now that the vehicle is securely elevated, fully remove the loosened lug nuts and take off the wheel. Set the wheel aside for later reinstallation.

5. Inspect the Brake Drum Before removing the drum, inspect it for any visible damage or wear. Sometimes, the brake drum may be stuck due to rust or debris.

6. Remove the Brake Drum If the drum is stuck, use a brake drum puller to gently pull it away from the wheel hub. If a puller isn't available, gently hammering around the circumference of the drum with a rubber mallet can help. Be cautious not to damage the drum or the wheel hub.

7. Check the Brake Components Once removed, inspect the brake shoes, springs, and wheel cylinder for wear or damage. This is a good time to clean the brake components with brake cleaner and a rag.

8. Reinstallation If you’re only replacing the drum, or have completed other necessary repairs, reinstall the drum by placing it onto the hub. Make sure it fits snugly. Reattach the wheel and hand-tighten the lug nuts.

9. Lower the Vehicle Carefully remove the jack stands and lower the vehicle back to the ground.

10. Torque the Lug Nuts Once the vehicle is on the ground, use the lug wrench to securely tighten the lug nuts in a crisscross pattern to ensure even tightening.

Conclusion

Removing the rear brake drum on a Mitsubishi Canter is a manageable task with proper tools and attention to detail. Always prioritize safety and make regular inspections of your vehicle’s brake components to ensure optimal performance. By following these steps, you can ensure your vehicle remains safe and reliable on the road. Regular maintenance will not only prolong the life of your brakes but also enhance overall driving safety. If you encounter any issues or feel unsure during the process, consult a professional mechanic for assistance.