Steps for Removing the Rear Brake Drum on a Mitsubishi Canter Vehicle

Nov . 10, 2024 20:29 Back to list

Steps for Removing the Rear Brake Drum on a Mitsubishi Canter Vehicle

How to Remove the Rear Brake Drum on a Mitsubishi Canter

When it comes to maintaining the braking system of your Mitsubishi Canter, the removal of the rear brake drum can be a crucial step, especially if you're experiencing braking issues. This task may seem daunting, but with the right tools and a bit of guidance, you can accomplish it on your own. This article will walk you through a step-by-step process for removing the rear brake drum from your Mitsubishi Canter.

Tools and Equipment Needed

Before you begin the process, gather the following tools

1. Jack and Jack Stands For safely lifting the vehicle. 2. Lug Wrench To remove the wheel bolts. 3. Brake Drum Puller This specialized tool can help in removing the drum if it is stuck. 4. Screwdrivers Flathead and Phillips for various fasteners. 5. Wrench Set To loosen bolts and nuts. 6. Pliers For any clips or springs that may need to be removed. 7. Brake Cleaner To clean the components once they are exposed. 8. Gloves and Safety Glasses For safety during the process.

Step-by-Step Removal Process

Step 1 Safety First

Park your Mitsubishi Canter on a flat surface and engage the handbrake. Make sure the vehicle is turned off and cool. Put on your gloves and safety glasses before you start the process.

Step 2 Lift the Vehicle

Using your jack, lift the rear of the vehicle. Secure it with jack stands to avoid any risk of the vehicle collapsing while you work.

Step 3 Remove the Wheel

Using the lug wrench, loosen and remove the lug nuts from the rear wheel. After removing the nuts, take off the wheel to access the brake drum.

mitsubishi canter rear brake drum removal

Step 4 Inspect the Brake Assembly

With the wheel removed, take a moment to visually inspect the brake assembly. Look for any obvious signs of wear, such as worn brake shoes or damaged components.

Step 5 Remove the Brake Drum

1. Loosen Adjuster If the drum is stuck, it may be necessary to loosen the brake shoe adjuster. This is typically accessible through a small slot on the rear of the drum. Insert a screwdriver to rotate and loosen the adjuster until there is enough clearance to remove the drum.

2. Pull Off the Drum Once the adjuster is loosened, try to pull the brake drum straight off. If it resists, you may need to use the brake drum puller. Attach the puller to the drum and turn the central bolt slowly to extract the drum.

3. Check for Damage After removing the drum, inspect it for wear, cracks, or excessive scoring. If it’s in poor condition, you should consider replacing it.

Step 6 Clean and Maintain

With the drum removed, take this opportunity to clean the brake components using brake cleaner. Spray the shoes, springs, and wheel cylinder to remove dust or debris. This maintenance step is essential for ensuring optimal brake performance.

Step 7 Reinstallation

If you're planning to reinstall the same drum or install a new one, reverse the removal steps. Ensure that the brake shoes are correctly adjusted and that all components are in good working order.

Conclusion

Removing the rear brake drum of your Mitsubishi Canter is a valuable skill for any vehicle owner who wants to maintain their ride’s performance and safety. By following the steps laid out in this article, you'll not only save on labor costs but also gain a deeper understanding of your vehicle’s braking system. Always remember to prioritize safety and don’t hesitate to consult a professional mechanic if you are unsure about any part of the process. Happy wrenching!