mitsubishi canter rear brake drum removal

Nov . 14, 2024 13:30 Back to list

mitsubishi canter rear brake drum removal

How to Remove the Rear Brake Drum on a Mitsubishi Canter

Removing the rear brake drum from a Mitsubishi Canter can seem daunting, especially for those who are not experienced with automotive repairs. However, with the right tools, a little patience, and a step-by-step approach, you can successfully accomplish this task. This guide will walk you through the process of removing the rear brake drum on a Mitsubishi Canter.

Tools and Materials Needed

Before you begin, gather the necessary tools and materials. You will need

- Hydraulic jack and jack stands - Lug wrench - A brake drum removal tool (if available) - A basic toolset (ratchet, sockets, wrenches) - Screwdrivers (flathead and Phillips) - Brake cleaner - Shop towels - Safety glasses and gloves

Step 1 Safety First

Ensure that you are working in a safe environment. Park the Mitsubishi Canter on a flat surface and engage the parking brake. For additional safety, you can also place wheel chocks behind the front wheels to prevent the vehicle from rolling.

Step 2 Remove the Wheel

Using the lug wrench, loosen the lug nuts on the rear wheel of the Canter. Once the nuts are loose, use the hydraulic jack to lift the vehicle. Place the jack stands securely under the vehicle to ensure stability. Once the vehicle is safely elevated, remove the lug nuts completely and take off the wheel to expose the brake drum.

Step 3 Inspect the Brake Components

With the wheel removed, you will have access to the brake drum. Take this opportunity to inspect the brake shoes and components for wear or damage. If you notice any significant wear, it may be wise to replace these parts during the drum removal process.

mitsubishi canter rear brake drum removal

Step 4 Remove the Brake Drum

Depending on the model of your Mitsubishi Canter, the brake drum might be held in place by retaining screws or just by the friction of the components. If there are retaining screws, remove them using the appropriate screwdriver. If the drum is stubborn and does not come off easily, you may need to use a brake drum removal tool. Place the tool over the drum, ensuring it is aligned, and turn the handle to pull the drum off.

If there are no screws and the drum is stuck due to corrosion or dirt buildup, gently tap around the edge of the drum with a rubber mallet. This should help break the bond before attempting to pull it off.

Step 5 Clean and Inspect

Once the brake drum is removed, clean it with brake cleaner and inspect the inside for any grooves or scoring. Check the brake shoes as well to make sure they are not excessively worn or damaged. If everything looks good, you can proceed with reinstallation or replacement as necessary.

Step 6 Reinstallation

If you are simply replacing the brake drum, ensure that you have the correct part for your Mitsubishi Canter. Place the new or cleaned drum back into position and secure it with the retaining screws, if applicable. Reattach the wheel, hand-tighten the lug nuts, and lower the vehicle back to the ground.

Step 7 Final Checks

Once the vehicle is back on the ground, tighten the lug nuts in a crisscross pattern to ensure even pressure. After everything is secured, pump the brake pedal a few times to seat the brake shoes against the drum properly.

Conclusion

Removing the rear brake drum on a Mitsubishi Canter is a straightforward process if you follow these steps carefully. Taking the time to inspect and clean the components can lead to better braking performance and safety. Always remember to wear safety gear and follow proper procedures to ensure a safe working environment. If you encounter difficulties or feel unsure, don’t hesitate to consult a professional mechanic for assistance.