Nov . 17, 2024 11:57 Back to list

How to Remove the Rear Brake Drum on a Mitsubishi Canter Vehicle

How to Remove the Rear Brake Drum on a Mitsubishi Canter


The Mitsubishi Canter is a popular light commercial vehicle known for its reliability and robustness. Maintaining its braking system is crucial for safety and performance. One necessary task is the removal of the rear brake drum, which can be needed for various reasons, including brake pad replacement, inspection, or cleaning. In this article, we’ll guide you through the process of removing the rear brake drum safely and efficiently.


Tools Required


Before you begin, gather the following tools - Jack and jack stands - Lug wrench - Brake drum puller (optional, depending on wear) - Socket set - Screwdriver - Safety goggles and gloves


Step-by-Step Process


1. Safety First Park your Mitsubishi Canter on a flat surface and engage the parking brake. Wear safety goggles and gloves to protect yourself during the process.


2. Loosen the Lug Nuts Using a lug wrench, slightly loosen the lug nuts on the rear wheel where you need to remove the brake drum. Do not completely remove them yet; just break their initial tightness.


3. Lift the Vehicle Use a jack to lift the rear of the vehicle. Once elevated, position jack stands securely under the chassis to ensure the vehicle is stable and safe to work underneath.


4. Remove the Wheel Finish removing the lug nuts and take off the rear wheel. Set the wheel aside safely.


mitsubishi canter rear brake drum removal

mitsubishi canter rear brake drum removal

5. Inspect the Drum Before removing the brake drum, visually inspect it for any obvious damage or wear. Look for leaks from the wheel cylinder, as this could indicate additional maintenance is needed.


6. Remove the Brake Drum At this point, the brake drum may come off easily. If it does not, you may need to gently tap it with a hammer to loosen it from the hub. If it’s particularly stubborn, use a brake drum puller to avoid damaging the drum or the surrounding components.


7. Check Components Once the drum is removed, check the brake shoes and other components for wear. This is a good time to clean any dust and debris within the brake assembly using a brake cleaner.


8. Reassembly If you’re replacing the drum or completing maintenance, now is the time to install new components as necessary. Once all necessary work is done, slide the brake drum back on. Ensure it sits flush against the hub.


9. Reattach the Wheel Place the wheel back onto the hub, hand-tighten the lug nuts, then lower the vehicle back to the ground and securely tighten the lug nuts in a crisscross pattern.


10. Test the Brake System Once the vehicle is back on the ground, ensure all components are reassembled correctly, and test the brakes before driving.


Conclusion


Removing the rear brake drum on a Mitsubishi Canter may seem daunting, but with the right tools and a careful approach, it can be done safely at home. Regular maintenance of the braking system is essential for ensuring your vehicle operates effectively. If you're uncertain about any step, it's always a good idea to consult a professional mechanic.




Share

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


en_USEnglish