How to remove a stuck brake drum from the hub without damaging it

jul . 12, 2024 11:42 Back to list

How to remove a stuck brake drum from the hub without damaging it

Brake drum stuck to hub is a common issue that many car owners may face at some point during the life of their vehicle. When the brake drum becomes stuck to the hub, it can make it difficult to remove the brake drum for routine maintenance or repairs. In this article, we will discuss the causes of a brake drum becoming stuck to the hub and how to properly remove it. One of the main reasons why a brake drum may become stuck to the hub is due to rust and corrosion buildup between the two components. Over time, moisture and road debris can cause rust to form on both the hub and the brake drum, creating a bond that makes it difficult to separate the two. Additionally, if the brake drum is not installed properly or is warped, it can also become stuck to the hub. To remove a brake drum that is stuck to the hub, there are a few steps that you can take. First, you will want to make sure that the vehicle is securely lifted and properly supported on jack stands. Next, you will need to remove the wheel and tire to gain access to the brake drum. Once the wheel is removed, you may need to use a rubber mallet or a hammer to tap around the edges of the brake drum to help break the rust bond between the drum and the hub. If tapping around the edges of the brake drum does not work, you may need to use a penetrating oil such as WD-40 to help loosen the rust and corrosion

brake drum stuck to hub. Simply spray the penetrating oil around the edges of the brake drum and allow it to sit for a few minutes to work its magic. Once the oil has had time to penetrate the rust, you can then try tapping around the edges of the brake drum again to help loosen it from the hub. If the brake drum is still stuck after using a penetrating oil, you may need to use a brake drum puller tool to help remove the drum. A brake drum puller tool is specifically designed to safely and effectively remove a stuck brake drum without causing damage to the drum or the hub. Simply attach the puller tool to the brake drum and tighten the screw to create pressure, which will help pull the drum away from the hub. Once you have successfully removed the stuck brake drum, it is important to clean the hub and the brake drum to remove any remaining rust and debris. You can use a wire brush or sandpaper to scrub away any rust buildup and then apply a thin layer of anti-seize lubricant to help prevent future corrosion. In conclusion, a brake drum becoming stuck to the hub can be a frustrating and time-consuming issue to deal with. However, by following the steps outlined in this article, you can safely and effectively remove a stuck brake drum from the hub. Remember to always take proper safety precautions when working on your vehicle and consult a professional mechanic if you are unsure of how to properly remove a stuck brake drum.