Guide to Removing Rear Brake Drum from Mitsubishi Canter Step by Step

Oct . 17, 2024 02:14 Back to list

Guide to Removing Rear Brake Drum from Mitsubishi Canter Step by Step

How to Remove the Rear Brake Drum on a Mitsubishi Canter

The Mitsubishi Canter, a popular light commercial vehicle, is renowned for its durability and excellent performance. Over time, components like the rear brake drums may require maintenance or replacement due to wear and tear. Removing the rear brake drums is a crucial skill for any DIY mechanic or truck owner. This guide will take you through the detailed steps to safely and effectively remove the rear brake drum from a Mitsubishi Canter.

Gathering Your Tools

Before starting the process, ensure that you have the necessary tools at hand. You will need - A floor jack - Jack stands - A lug wrench - A brake drum puller (if necessary) - Basic hand tools (screwdrivers, wrenches) - Brake cleaner - Safety glasses and gloves

Safety First

Before you begin any maintenance work on your vehicle, it’s vital to prioritize safety. Ensure your Canter is parked on a flat surface and engage the parking brake to prevent any movement. Always wear safety glasses and gloves to protect yourself from debris and sharp edges.

Lifting the Vehicle

1. Loosen the Lug Nuts Start by using a lug wrench to slightly loosen the lug nuts on the rear wheels. Do not remove them completely at this stage. 2. Lift the Vehicle Position a floor jack under the rear axle and raise the vehicle until it’s high enough to work comfortably. Make sure it is stable, then place jack stands under the vehicle to support it securely. 3. Remove the Wheels Now that the Canter is safely lifted, remove the lug nuts completely and take off the rear wheels to expose the brake drum.

Removing the Brake Drum

1. Inspect the Drum Once the wheels are off, visually inspect the brake drum for any damage or wear. This is also a good time to check other components like shoes and springs.

2. Release the Brake Adjuster If your Canter is equipped with drum brakes, locate the brake adjuster through the access hole on the backing plate. Rotate it to back off the adjustment, which will free the brake shoes from the drum.

mitsubishi canter rear brake drum removal

3. Remove the Brake Drum Gently pull the brake drum straight off the hub. If it’s stuck due to rust or debris, you can use a brake drum puller. Place it on the drum and turn the adjusting screw until the drum begins to loosen. Be careful not to use excessive force, as this could damage the drum or the hub.

4. Inspect for Damage Once removed, check the brake drum for any signs of scoring, cracking, or unusual wear. If it’s damaged beyond repair, it will need to be replaced.

Reassembly

1. Clean the Components Use brake cleaner to clean both the brake drum and the hub. Remove any dust or debris to ensure proper operation.

2. Install the New Drum If you are replacing the drum, carefully place the new drum onto the hub. Make sure it’s seated correctly.

3. Reassemble the Brake System Adjust the brake shoes back into position and ensure they are correctly aligned. Replace any covers or hardware you may have removed during disassembly.

4. Reinstall Wheels Place the wheels back onto the hubs, tighten the lug nuts by hand, and then lower the vehicle back to the ground using the floor jack. Once on solid ground, tighten the lug nuts in a crisscross pattern to ensure even tightening.

Final Check

After everything is reassembled, it’s crucial to perform a final check. Recheck the wheel lug nut torque and make sure that the brake components are functioning properly. Before hitting the road, take the truck for a short test drive, ensuring that the brakes perform effectively.

Removing the rear brake drum from a Mitsubishi Canter can be a straightforward process when approached methodically. With the right tools and safety precautions, you can maintain your vehicle’s performance effectively.