How to construct a forge using a brake drum as the base

júl . 12, 2024 11:43 Back to list

How to construct a forge using a brake drum as the base

Brake drums are commonly used in cars to help with braking and slowing down the vehicle. However, they can also be repurposed to create a forge for blacksmithing. Building a forge from a brake drum is a cost-effective way to start your blacksmithing journey, and it's relatively easy to do with the right tools and materials. To build a forge from a brake drum, you will need the following materials - A brake drum - A metal pipe - A hairdryer or a shop vacuum - Fire-resistant bricks or clay - Some type of fuel, such as charcoal or coal - An angle grinder or metal-cutting tools - Safety gear, such as gloves and goggles Here's how you can build a forge from a brake drum 1. Start by finding a suitable brake drum. You can usually find old brake drums at junkyards or auto shops. Make sure to choose a brake drum that is clean and free from any contaminants. 2. Cut a hole in the side of the brake drum using an angle grinder or metal-cutting tools. This hole will be used to insert the metal pipe, which will act as the air supply for the forge. 3. Attach the metal pipe to the hole in the brake drum using bolts or welding. Make sure the pipe is securely attached to the brake drum and that there are no gaps where air can escape. 4

how to build a forge from a brake drum. Place fire-resistant bricks or clay inside the brake drum to help insulate the heat and protect the metal. You can also use a fireproof lining to further protect the brake drum from damage. 5. Connect a hairdryer or a shop vacuum to the metal pipe to provide a source of forced air. This will increase the temperature of the fire and help it burn hotter. 6. Fill the brake drum with your chosen fuel, such as charcoal or coal. Light the fuel and adjust the airflow using the hairdryer or shop vacuum to control the temperature of the fire. 7. Once the forge is hot enough, you can start blacksmithing by heating metal in the fire and shaping it using your tools. Building a forge from a brake drum is a fun and cost-effective way to get started with blacksmithing. With the right materials and tools, you can create a functional forge that will allow you to work on various metal projects. Remember to always wear safety gear when working with fire and hot metal, and have fun experimenting with different techniques and designs. Enjoy your blacksmithing journey!